Introducing Esco CelCulture® - world class CO₂ incubators from Esco with the technologies and compliance to prove it. Precise parameter control, robust contamination control with ULPA filtration system and 90°C moist heat decon. cycle, direct heat & air jacket design with 8 heaters grouped into 3 zones, gentle yet effective forced convection, intuitive interfaces, intelligent data and event logger with 16MB built-in flash memory, all supported by Esco's solutions - based sales and service representatives worldwide.

Key Benefits:

• ULPA filtration system.
• 90°C moist heat decontamination cycle,
  validated by HPA UK.
• Precise temperature and gas control.
• Cost effective.

VivoCell™ Precise Temperature,
CO₂ Control and High Humidity

• Best uniformity and control among competition
• Fast CO₂, temperature and humidity recovery without overshoot.
• Direct heat design for rapid recovery, with 8 heater grouped into 3 zones.
• Air jacket provides isolation against ambient temperature fluctuations.
• VentiFlow™ forced convection accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination.
• Filtered air circulates across water pan to accelerate humidifying process.
• Air flows gently around culture plates, causing no disturbance to cell culture.
• Blower automatically stops when door is opened, to minimize mixing of chamber and room air.

• SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 condition.
• SwiftCon™ moist heat 90⁰C decontamination cycle operates overnight to eradicate any contamination in the unlikely event it occurs. At the end of the cycle, the chamber is dry and ready to use.
• All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
• The incubator’s main body is made from electro-galvanized steel with Esco’s unique ISOCIDE antimicrobial coating.
• The interior of the chamber is made from stainless steel type 304.

• Comprehensive user-configurable alarms for all the parameters.
• CelAlert™ alarm system reminds user to replace CO₂ tank and ULPA filter.
• Intelligent data and event logger records all incubator parameters for on screen recall.
• 16 MB built-in flash memory guarantees long term storage of data.
• Diagnostic interface and on line quick help provide comprehensive solutions to frequently. encountered problems.
• RS485 data output.

• Chamber is made of shiny stainless steel chamber with all rounded corners.
• Ductwork, plenums and shelves are removable without tools.
• Glass door is removable without tools.
• Inner gasket removable without tools.

• Diagnostic functions in the microprocessor include historical read-out of the parameters.
• Service can be carried out from the top/front.
• Esco electronics and sensors have been expertly designed and paired to be inherently drift-free,
  to minimize need for calibration.
• Low service costs.

Cat. No.	Description
CCL-170A-8	CelCulture® Incubator, 170L, TC Sensor, CO2 Control, ULPA, Moist Heat Decon, 230VAC, 50/60HZ
CCL-170B-8	CelCulture® Incubator, 170L, IR Sensor, CO2 Control, ULPA, Moist Heat Decon, 230VAC, 50/60HZ
CCL-170T-8	CelCulture® Incubator, 170L, IR Sensor, CO2 Control,O2 Control ULPA, Moist Heat Decon, 230VAC 50/60HZ
CCL-170A-9	CelCulture® Incubator, 170L, TC Sensor, CO2 Control, ULPA, Moist Heat Decon, 115VAC, 50/60HZ
CCL-170B-9	CelCulture® Incubator, 170L, IR Sensor, CO2 Control, ULPA, Moist Heat Decon, 115VAC, 50/60HZ
CCL-170T-9	CelCulture® Incubator, 170L, IR Sensor, CO2 Control,O2 Control ULPA, Moist Heat Decon,115VAC 50/60HZ