The Esco Ascent® Max Ductless Fume Cabinet offers a sensible balance of quality, performance features and cost -effectiveness. It operates at a very low noise level (56dBA) with extremely low energy consumption (4ft cabinet -only 0.22kW) and is fully compliant to major international standards.
 
|
| |
| |
Superior Containment Capabilities
|
- Constructed using all-metal carcass which creates an air-tight outer shell for the best possible toxic fume containment possible
- Electro-galvanised steel external shell for greater rust resistant properties and longer service life
- AutoPurge™ perforations at the back of the work zone prevents dead air pockets and eddy currents
- Independently tested and certified by Invent-UK to meet and exceed the requirements of BS7258:200, ASHRAE110-1995, AFNOR NF X 15-203, and EN 14175-3
- Independently tested and certified by Exposure Control Technologies (ECT), USA to meet and exceed the requirements of ASHRAE110-1995
|
| |
| |
| Certified Filtration Efficiency |
- Nanocarb™ activated carbon filter and built-in Pre-Filter remove all chemical fumes from exhaust
- Unique diffusion technology with white epoxy powder-coated filter diffuser
- EBM-PAPST blower that guarantees lower noise and better airflow uniformity
- Independently tested and certified by Invent-UK to meet and exceed the requirements of BS7989:2001 and AFNOR NF X 15-211
|
| |
| |
| Good Ergonomics |
-
Ergonomically designed 3-degree sloped front
-
High internal ceiling (765mm/30.1”) inside the workzone
-
Glass front and sides provide a high degree of visibility into the workzone
-
Frameless sash window enhances operator's visibility into the workzone
-
Curved front-edge that minimises aifrlow turbulence and improves user comfort
-
Control panel is sloped downwards to provide the operator (in a sitting position) a better view of and an easier access to the controls
|
| |
| |
| Main Features |
-
Grade stainless steel (S/S304) work surface that will never rust, chip, or generate particles
-
Lip at the front edge of the work surface ensures that any spillage is contained within the workzone
-
A fully configurable Sentinel™ microprocessor control with audible and visual alarms for unsafe conditions
-
Built-in 5000k warm white fluorescent lighting
-
Front service panel opens up easily for immediate access for all maintenance function
-
Small Filter ID window to easily identify the type of filter being used
-
Powder-coated panel-mounted single electrical outlet provision
-
Isocide™ antimicrobial coated structure eliminates 99.9% of bacterial presence on external surfaces within 24 hours
-
All cabinet service and filter replacement can be carried out from the front, allowing the cabinet to be placed against walls in the laboratory to save space
-
Electronic module behind the hinged front panel for easy access during troubleshooting and certification
-
Retrofit Kit™ service fixture for air/water/vacuum/gas outlets
-
Retrofit Kit™ Polypropylene drip-cup sink and epoxy powder-coated swan neck faucet
|
| |
| |
| Main Features |
- Exhaust collar for added operator safety
- PID sensor to monitor the chemical concentration within the cabinet workzone
- Secondary back-up filter HEPA or Activated Carbon (complies with the requirements of ANSI/AIHA Z9.5-2003 )
- Transparent back-wall ideal for classroom demonstration
- Base cabinet and support stand accesories
- Over 7 different Nanocarb™ carbon filter types, choose from: acid, mercury, sulphur, halogen, aldehyde, ammonia, or HEPA filter.
Designed to exceed the performance and safety requirements of:
Individually factory-tested and delivered with commissioning report.
When equipped with the optional ULPA filter (in lieu of standard carbon filters), Esco Ascent Max Cabinets are suitable for weighing applications with fine powders.
|
| |
