810 LX - Washing System :: Mandel Scientific Company Inc.

Also see LANCER cleaning chemicals

810 LX - Washing System

Designed to wash inside narrow necked laboratory glassware using injectors and open glassware using rotary spray arms, the LX washers utilize spindle header racks allowing water, detergent and acid to be injected into inverted glassware. The wash pump and hydraulic circuit provide a high flow rate and low-pressure delivery for thorough cleaning without breakage of washed items.

Please contact Mandel Scientific Company Inc. (Toll Free: (888) 883-3636) for pricing and information.

Features:

The LANCER 810 LX undercounter glassware washer fits in the same space as a domestic dishwasher but has professional features including 304 L stainless steel construction, 4 microprocessor controlled programs and self-diagnostic software for monitoring all aspects of operation. It includes a steam condenser to protect against casework and an insulated chamber for quiet operation. Built in detergent and acid neutralizer peristaltic pumps provide labor free dosing of cleaning chemicals while the Triple Filter System protects the circulation pump from glass and debris.

The LANCER 810 LX has 2 independent wash levels with racks that are interchangeable between both levels. Racks for the 810 LX are also interchangeable between other LANCER glassware washers including the LANCER 815 LX undercounter glassware washer, the LANCER 820 LX undercounter glassware washer, the LANCER 910 UP freestanding glassware washer and the LANCER 1300 UP freestanding glassware washer. Racks are sold separately.

Quality and Standards

Manufactured under ISO 9001 accreditation.
UL-3101-1, Electrical Equipment for Laboratory Use.

Under Counter Spacing

Fits in a standard 24-inch casework opening.

Peristaltic Detergent & Acid Pumps

Allow for precise addition of either chemical agent for critical cleaning applications.

Steam Condenser

Removes vapor and steam whenever chamber temperature exceeds 50° C and directs all condensate, vapor and steam to drain.

Water Level Sensors

Two independent sensors control chamber water level and prevent overflow.

Electronic Thermostat

For independent selection of temperature for pre-wash, wash and final rinse between ambient and 95°C.

Super Drying System

15 kW heating elements and associated blowers provide drying up to 100°C by directing hot air into the chamber and through the jets.

Main Recirculation Pump

¾ HP with a capacity of 92 gal/min (350 l/min).

Wash Solution Heating System

6 kW electric heating elements provide heating up to 95 ° C.

Drop Down Door

Provides a loading platform eliminating the need for a loading cart.

Fully Extendable Load Bearing Arms

Support jet racks for easy loading and unloading of glassware without the need for a loading cart.

Two Available Levels of Washing

With automatic actuation when inserting jet racks.

4 Flexible Programs

“LX” Universal Programming controlled by microprocessor, individually selected programs available and stored in memory.

Systems Monitoring and Alarms

Self-diagnostic monitoring of all functions with audible and visual fault alarms provide quality control to each wash cycle.

Systems Control Panel

7 button keypad with 2 ½ inch LCD to interface with the washer.

Chemical Level Sensors

Alert operator by audible and visual alarm when the volume of detergent or acid becomes too low.

Systems Control Panel

4 ½ inch LCD with up to 16 character program naming capability.

Specifications:

External:	33 ¼” H x 23 ½” W x 26 ¾” D (845 x 600 x 680 mm).
Internal:	20” H x 21” W x 20” D (508 x 535 x 510 mm)
Effective Wash Chamber Loading Area:	421 square inches (2,716 square cm) on each of the 2 levels for a total of 842 square inches (5,432 square cm), minimum.
Water Consumption:	3.1 Gallons approximately per fill.
Heat Loss:	2,380 Btu/hr (697 W) maximum
Sound Level :	63 dB.

Utility Requirements:
Electrically Heated Washer	Provide a power cord or hard wire connection and a fusible disconnect switch. Electrically Heated Washer, with Drying 208 V, 60 Hz, 1-Phase, 7 kW, 34 A/Phase 230 V, 60 Hz, 1-Phase, 7 kW, 31 A/Phase 208 V, 60 Hz, 3-Phase, 7 kW, 20 A/Phase 230 V, 60 Hz, 3-Phase, 7 kW, 18 A/Phase
Cold Water (Softened)	Provide a shut off valve with a threaded ¾ inch male hose thread nozzle. Flow Rate: 5 ¼ gal/min (20 l/min) with a pressure between 29 to 87 psig (200 to 600 KPa). Washer is equipped with a 5 foot (1,524 mm) long, ½ inch (12mm) diameter hose with ¾ inch female hose thread fitting.
Purified Water	Provide a shut off valve with a threaded ¾ inch male hose thread nozzle. Flow Rate: 5 ¼ gal/min (20 l/min) with a pressure between 29 to 87 psig (200 to 600 KPa). Washer is equipped with a 5 foot (1,524 mm) long, ½ inch (12mm) diameter hose with ¾ inch female hose thread fitting.
Drain Connection	Provide a fixed standpipe and plumbing trap with a minimum inside diameter of 1 ½ inches (40 mm). Height above finished floor level between 20 to 27 inches (500 to 700 mm). Flow Rate: 5 gal/min (20 l/min). Washer is equipped with a 5 foot (1,524 mm) long, ¾ inch (19 mm) diameter hose with gooseneck for connection to standpipe.
Condensate Drain Connection	Provide a fixed standpipe and plumbing trap with a minimum inside diameter of 1 ½ inches (40 mm). Height above finished floor level between 20 to 27 inches (500 to 700 mm). Flow Rate: 5 gal/min (20 l/min). Washer is equipped with a 5 foot (1,524 mm) long, ¾ inch (19 mm) diameter hose with gooseneck for connection to standpipe.

Available Accessories:
Customized Baskets	Modification of existing racks or design and manufacture of custom racks to thoroughly clean specific items or load configurations.
Starter Kit	Versatile accessory with direct injectors (PS/27IXLC) enables washing of a wide variety of glassware in the same batch.
Jet Racks	15 different configurations from 20 to 100 jets. Capable of cleaning a wide variety of glassware.
Basic Basket Tray & Basket Tray with Spray Arm	Used to clean beakers and other large neck items.
Tall and Short Baskets with Lids	Perfect for cleaning test tubes and small parts. Adjustable lids and partitions ensure items are held in place during the cleaning process.
Mesh Covers for Jet Racks and Basket Trays	Covers used to hold down glassware and to prevent smaller items from being dislodged from the jets.
Pipette Rack and Combination Racks	LANCER’s combination racks produce excellent cleaning results while maximizing chamber space.