Mandel Hopmepage
HomeTo Order
 

General Lab EquipmentBalancesCentrifugesCryogenicsFreezers and RefrigeratorsFume HoodsHomogenizersRadiation SafetyShakers, Stirrers, VortexesSonicatorsSterilizersTemperature RegulationWashers and Dryers

Water and Dry BathsWater PurificationGloves
   
910 LX - Washing and Drying System Lancer Logo
910 LX

The LANCER 910 LX freestanding glassware washer dryer has professional features including 304 L stainless steel construction, 42 microprocessor controlled programs, HEPA filtered Injector Drying System, and self-diagnostic software for monitoring all aspects of operation. It includes an insulated chamber for quiet operation. On board storage of cleaning chemicals with built in detergent and acid neutralizer peristaltic pumps provide labor free dosing of cleaning chemicals while the Triple Filter System protects the circulation pump from glass and debris.

Cat. No. LCR-910LX

Features:

The LANCER 910 LX has 2 independent wash levels with racks that are interchangeable between both levels. Racks for the 910 LX are also interchangeable between other LANCER glassware washers including the LANCER 810 LX undercounter glassware washer, the LANCER 815 LX undercounter glassware washer, the LANCER 820 LX freestanding glassware washer and the LANCER 1300 UP freestanding glassware washer. Racks are sold separately.

Quality and Standards

  • Manufactured under ISO 9001 accreditation.
Peristaltic Detergent & Acid Pumps
  • Allow for precise addition of either chemical agent for critical cleaning applications.
Water Level Sensors
  • Two independent sensors control chamber water level and prevent overflow.
Electronic Thermostat
  • For independent selection of temperature for pre-wash, wash and final rinse between ambient and 95°C.
Forced Air Drying System
  • 1.8 kW heating elements and a blower provide drying up to 110°C.
Main Recirculation Pump
  • ¾ HP with a capacity of 92 gal/min (350 l/min).
Wash Solution Heating System
  • 9 kW electric heating elements provide heating up to 95oC (3 phase)
  • 6 kW electrical heating elements provide heating up to 95oC (single Phase)
Drop Down Door
  • Provides a loading platform eliminating the need for a loading cart.
  • Electric door closing system automatically latches door
Door Lock
  • Prevents interference with wash cycle once it is in operation.
  • Automatic electrical door lock
Fully Extendable Load Bearing Rack Arms
  • Support jet racks for easy loading and unloading of glassware
  • without the need of a loading cart.
Two Available Levels of Washing
  • With automatic actuation when inserting jet racks.
42 Flexible Programs
  • Controlled by microprocessor individually selected programs available and stored in memory
Systems Monitoring and Alarms
  • Self-diagnostic monitoring of all functions with audible and visual fault alarms provide quality control to each wash cycle
Systems Control Panel
  • 2 line LCD with up to 16 character program naming capability.
On-board Chemical Storage
  • Pullout drawer provides storage and spill containment for a 2 ½ gallon (10 liter) container of detergent solution and a 2 ½ gallon (10 liter) container of acid solution.
Chemical Level Sensors
  • Alert operator by audible and visual alarm when the volume of detergent or acid becomes too low.

Specifications:

External: 57 ¾” H x 23 ¾4” W x 29” D (1466 x 604 x 736 mm).
Internal: 21 3/8” H x 21” W x 20” D (544 x 535 x 510 mm)
Effective Wash Chamber Loading Area:
  • 420 square inches (2,728 square cm) on each of the 2 levels for a total of 840 square inches (5,456 square cm), minimum.
Water Consumption:
  • 3 ½ Gallons approximately per fill.
Heat Loss:
  • 3,000 Btu/hr (895 W) maximum.
Sound Level
  • 65 dB.
 
Utility Requirements:  
Electrically Heated Washer
  • Provide a power cord or hard wire connection and a fusible disconnect switch.
  • Electrically Heated Washer, with Drying
    • 208 V, 60 Hz, 1-Phase, 7 kW, 30 A/Phase
    • 230 V, 60 Hz, 1-Phase, 7 kW, 30 A/Phase
    • 208 V, 60 Hz, 3-Phase, 10 kW, 26 A/Phase
    • 230 V, 60 Hz, 3-Phase, 10 kW, 26 A/Phase
Hot Water
  • Provide a shut off valve with a threaded ¾ inch male hose thread nozzle. Flow Rate: 5 ¼ gal/min (20 l/min) with a pressure between 29 to 87 psig (200 to 600 kPa). Maximum Temperature: 50°C (122°F).
  • Washer is equipped with a 5 foot (1,524 mm) long, ½ inch (12mm) diameter hose with ¾ inch female hose thread fitting.
Cold Water
  • Provide a shut off valve with a threaded ¾ inch male hose thread nozzle. Flow Rate: 5 ¼ gal/min (20 l/min) with a pressure between 29 to 87 psig (200 to 600 kPa).
  • Washer is equipped with a 5 foot (1,524 mm) long, ½ inch (12mm) diameter hose with ¾ inch female hose thread fitting.
Purified Water
  • Provide a shut off valve with a threaded ¾ inch male hose thread nozzle. Flow Rate: 5 ¼ gal/min (20 l/min) with a pressure between 29 to 87 psig (200 to 600 kPa).
  • Washer is equipped with a 5 foot (1,524 mm) long, ½ inch (12mm) diameter hose with ¾ inch female hose thread fitting.
Drain Connection
  • Provide a fixed standpipe and plumbing trap with a minimum inside diameter of 1 ½ inches (40 mm). Height above finished floor level between 20 to 22 inches (500 to 550 mm). Flow Rate: 5 gal/min (20 l/min).
  • Washer is equipped with a 5 foot (1,524 mm) long, ¾ inch (19 mm) diameter hose with gooseneck for connection to standpipe.
 
 Available Accessories:
Manual Transfer Carts & Stationary Hold/Transfer Table Specially made in matching stainless steel to enable loaded racks to be easily removed and transferred to different locations.
Customized Baskets Modification of existing racks or design and manufacture of custom racks to thoroughly clean specific items or load configurations.
Starter Kit Versatile accessory with direct injectors (PS/27IXLC) enables washing of a wide variety of glassware in the same batch.
Jet Racks
  • 15 different configurations from 20 to 100 jets.
  • Capable of cleaning a wide variety of glassware.
Basic Basket Tray & Basket Tray with Spray Arm Used to clean beakers and other large neck items.
Tall and Short Baskets with Lids
  • Perfect for cleaning test tubes and small parts.
  • Adjustable lids and partitions ensure items are held in place during the cleaning process.
Mesh Covers for Jet Racks and Basket Trays Covers used to hold down glassware and to prevent smaller items from being dislodged from the jets.
Pipette Rack and Combination Racks LANCER’s combination racks produce excellent cleaning results while maximizing chamber space.
  Privacy Policy | Comments
Mandel Contact Us Mandel Homepage