 ProBlot™ Bottles
- Heavy walled, borosilicate glass
- Teflon™ seal for leak proof performance
- Resistant to common hybridization reagents
- Variety of sizes available
Labnet’s ProBlot™ hybridization bottles are constructed of high quality borosilicate glass which meets or exceeds the requirements for Class I, Type A glass of ASTM 438. The glass has low alkali content and a low coefficient of expansion. Heavy walled, the bottles block >95% of the beta emissions given off by 32P. The high temperature caps have a rugged Teflon™ seal for leak proof performance, even after prolonged use. The seals fit tightly into the caps and will not fall out when the caps are removed from the bottles. Bottles, caps and seals are resistant to all common hybridization reagents, including PEG. A variety of bottle sizes are available. Use of the proper sized bottle conserves valuable reagents and expensive probes. A convenient stand can be used for storing bottles upright when not in use.
Hybridization Mesh
- Prevents overlap and aids in reagent flow between membranes
- Assists in handling of membranes
- Inert - will not interfere with hybridization
- Available in precut sheets and rolls
Hybridization mesh, used to separate stacked membranes and aid in the flow of hybridization solutions between them, prevents membrane to membrane contact in areas of overlap and assists in the handling of blots. Labnet’s hybridization mesh is made of an inert material that cleans up easily. The mesh is available in convenient precut sheets and 40 yard rolls.
| Item Description |
Cat. No. |
Large hybridization bottle, 300 x 35 mm |
NL-B-3003 |
Large hybridization bottle, 300 x 35 mm, plastic coated |
NL-B-3003-PC |
Large hybridization bottle, 300 x 35 mm, caps on both ends |
NL-B-3003-DC |
Medium hybridization bottle, 250 x 35 mm |
NL-B-2503 |
Small hybridization bottle, 150 x 35 mm |
NL-B-1503 |
Small hybridization bottle, 150 x 35 mm, plastic coated |
NL-B-1503-PC |
Small hybridization bottle, two 75 mm chambers |
NL-B-2753 |
Extra small hybridization bottle, 75 x 35 mm |
NL-B-0753 |
Extra large hybridization bottle, 150 x 50 mm, with vented cap and o-ring seal |
NL-B-1507 |
Extra large hybridization bottle, 300 x 70 mm, with vented cap and o-ring seal |
NL-B-3007 |
Replacement cap with Teflon seal, fits all ProBlot 35 mm diameter bottles |
NL-B-1500-CAP |
Replacement Teflon seal, pack of 10, fits all ProBlot 35 mm diameter bottle caps |
NL-B-1500-SEAL |
Bottle rack for six 35 mm diameter bottles |
NL-B-1124 |
Large hybridization mesh, 23 x 23 cm, pack of 5 sheets |
NL-H-9088 |
Small hybridization mesh, 10 x 15 cm, pack of 5 sheets |
NL-H-9089 |
Roll of hybridization mesh, 40 in. x 5 yards |
NL-H-9090 |
|
