ANTEK's Model 7050 permits fast, sensitive analysis of nitric oxide in gas and liquid samples. Its unique, patented nitric oxide transfer vessel frees analysts of time-consuming sparging
with inert gas. The 7050 quantitates nitric oxide in gaseous samples in less than 30 seconds, while direct measurement of NO in liquid samples takes about one minute.
Cat. No. AK-99507-115V
Features:
-
Patented chemiluminescent method
-
Specific for nitric oxide
-
No known interferences
-
Rapid analysis
-
Handles most aqueous or gaseous samples
-
No sample preparation required
-
Designed for applications requiring high sensitivity & rapid analysis
-
Patented transfer system for liquid samples eliminates sparging
The 7050 is simple to equilibrate, calibrate, and maintain. ANTEK's patented chemiluminescent method is clean, fast, and efficient, requiring only oxygen for operation. By eliminating
need for buffers and other reagents, ANTEK's nitric oxide analyzer can be installed in any setting. Typical samples include headspace gases, mixed gases, expired breath, cell media,
chemical solutions, and non-bloody tissue homogenates
Specifications:
|
Detection Method
|
|
Patented nitrogen Chemiluminescence detection.
|
|
|
|
Performance
|
|
Response Time
|
40 milliseconds
|
|
Limits of Detection
|
Gas: < 5 ppb
|
|
Liquid:
|
< 1 picomole
|
|
Typical Sample Size
|
Gas: 0.5 μL - 50 mL
|
|
Liquid:
|
1 μL - 5 mL
|
|
Typical Analysis Time
|
Gas/Liquids: 30 seconds
|
|
Kinetics:
|
real time
|
|
Precision
|
±5% RSD<3 nanogram
|
|
|
|
Parameters
|
|
Operating Temperature
|
Ambient
|
|
Photomultiplier Voltage
|
0 - 1000 volts
|
|
Outputs
|
0 - 1 millivolt, 0 - 1 volt, 0 - 10 volts
|
|
|
|
Requirements
|
|
Power
|
115/230 VAC, 50/60 Hz, 1200 W
|
|
Gases
|
Dry oxygen: 1.5 bar (20 psi), Purity > 99.75% < 5 ppm H2O
|
|
|
|
Optional Carrier Gas
|
|
Dry helium:
|
1.5 bar (20 psi), Purity > 99.99%
|
|
|
|
Physical
|
|
System Dimensions
|
61 cm high (24 in) x 36 cm wide (14 in) x 59 cm deep (23 in)
|
|
Weight
|
28 kg (62 lb)
|
|
