The Beaker Autosamplers may be connected to QC-Titrate™ or PC-Titrate™ systems. Analysis of the sample is completed directly in the sample cups. A variety of sample cups may be used including 50ml tubes and 125ml beakers. The probe holder used in the system is dictated by the sample cup selected and by the number of electrodes required. For example, when analyzing in 50ml centrifuge tubes, only one 12mm electrode may be accommodated. However, in a 125ml sample cup, either the 2- or 3-electrode probe holder may be used.

PC-Titrate™ System with Large Beaker Autosampler

Advantages:

• True X,Y,Z random access, robotic autosamplers completely controlled by the software (no keypads required)
  • define sample rack positions within sample table or method
  • define different arm travel heights for separating conductivity measurements
  • from other electrodes - define travel only over unanalyzed samples
• Large unattended runs, e.g. operates overnight analyzing multiple parameters in the same batch run
• Active IntelliRinse™ system with the ability to set values (e.g. rinse to a user-specified
  conductivity value) or to adjust rinse intensity based on previous concentration, before moving onto the next sample, e.g. if sample concentration was high - use 3 rinse routines vs. only 2
• Define multiple rinse stations for aggressive rinsing, for example, a combination of
  solvent and water rinses to clean electrodes of oil and automatically re-hydrate the
  electrode before the next sample
• Define batch sizes larger than rack size since new samples may be added in place of
  analyzed samples

Standard Beaker Autosampler

Large Beaker Autosampler

Mega Beaker Autosampler