215 Liquid Handler/Injector :: Mandel Scientific Company Inc.

215 Liquid Handler/Injector

Single-probe, "workhorse" liquid handler delivers a robust performance for fast and accurate direct injection onto HPLC or LC/MS systems. Suitable for a wide variety of applications, with the ability to pierce thick septa. Performs injection, fraction collection and re-injection of collected fractions on one platform.

Features:

Versatile, large-bed liquid handler accommodates more than 330 racks to hold virtually any type of sample vessel
Add injection capabilities with the 819 Injection Module; configure with two 819 Injection Modules for increased throughput or for analytical and preparative injections
"Make-before-break" stator and large-bore rotor seal prevent pressure spikes from injection at high flows
Numerous custom software and rack configurations to meet the demands of your applications
New spring-loaded probe is ideal for low- and sub-microliter liquid handling applications, allowing "touch-off" deposition without damaging the substrate or degrading the sample

Applications:

Analytical analysis and preparative-scale purification of synthetic and biological compounds
Semipreparative compound purification and identification as part of Gilson’s LC/MS Autopurification System
Multidimensional separations with Solid Phase Extraction (SPE) for the preparation of protein digests for LC/MS/MS analysis

Specifications:

Manufacturing Standards

Meets applicable safety and EMC certification standards; UL and CE certified

Arm Speed

>45.7 cm/sec (>18 in./sec) in X dimension
>40.6 cm/sec (>16 in./sec) in Y dimension

Communication Interface

RS-232 or GSIOC; Four inputs (contact closure, TTL, or open-collector), four relay outputs and one switched +24V DC 1A output

Accuracy

Liquid handling: 99.7% with 50 µL of water

Front Panel

8-character display, START and emergency STOP soft keys

Horizontal Motion Strength

X: 5 kg (11.1 lbs.)
Y: 7 kg (15.6 lbs.)

Injection Carryover†

<0.1%

Locator Plate Capacity

Up to five Code 200-Series racks, up to seven Code 20- or 30-Series racks (or a combination of up to five racks of both types), or one Code 500-Series and one Code 200-Series rack

Maximum Syringe Flow Rates for Water

Syringe Size (µL)	Max. Flow Rate (mL/min)
100	3.37
250	8.43
500	16.87
1000	33.75
5000	100
10,000	100
25,000	100

Power Requirements

Frequency: 50–60 Hz
Voltage: 100–120 or 220–240V, mains voltage fluctuations not to exceed ±10% of the nominal voltage
Current rating: 2.0A for 100–120V or 1.0A for 220–240V

Probe Positioning Performance

Accuracy:±0.5 mm in X/Y dimensions±1 mm in Z dimension
Repeatability:±0.25 mm in X/Y/Z dimensions

Probe Rinse

Through a dedicated rinse station for rinsing the inside and outside of the probe; selectable rinse volume and flow rate. Optional inserts for level-sensing, nonleveling-sensing and flow rinse

Sampler Type

X/Y/Z with stationary rack design

Software

Via Gilson UniPoint™ System Software or TRILUTION™ Software

Syringe Capacity

100, 250 or 500 µL; 1, 5, 10 or 25 mL

Syringe Pump

Internal, integral, high-precision, single-piston

Vertical Punch Strength

4.9 kg (11 lbs.)

Reproducibility†

Liquid Handling:
1.37% CV with 50 µL of water
Injection:
<0.9% CV with 1-mL syringe and total loop filling method

Dimensions (w x d x h)

91.4 x 61 x 55.8* cm (36 x 24 x 22* in.)
*Maximum height. Z-arm height is adjustable to accommodate vessel heights between 1 and 150 mm (dependent on installed Z-arm).

Weight

39.9 kg (89 lbs.)

† Contact Mandel Customer Service to learn what methods and conditions were used to obtain the values.