| The 234 Autoinjector is a low-cost automatic injector that combines excellent reproducibility, versatility and performance for routine applications at an economical price.
Cat. No. GF-2710451
Features:
- Five built-in injection methods for quick and easy to set up and running of your samples
- User-selectable method parameters give you the flexibility to automate a wide range of routine sample handling procedures
- Three loop-filling options—total, partial and centered
- Stores up to 20 protocols for future retrieval
- Menu-driven software ensures fast, easy setup and operation
- Automatic, two-position needle rinsing station rinses both inside and outside the needle, eliminating a manual step and minimizing cross-contamination from carryover
Specifications:
Manufacturing Standards |
Meets applicable safety and EMC certification standards; UL and CE certified |
Available Sample Loop |
20 µL |
Available Valve |
Rheodyne 7010 |
Communication Interface |
GSIOC; Three inputs and two relay outputs |
Injection Carryover † |
<0.005% |
Injection Volume Range |
5 µL–5 mL |
Front Panel |
2-line, 80-character LCD, 5 soft keys for protocol setup; 2 LED injection valve position indicators |
Injection Reproducibility † |
<0.5% CV |
Liquid Contact Materials |
316L stainless steel, FEP, PEEK, PP, PI |
Locator Plate Capacity |
Up to 120 7-mL vials |
Power Requirements |
Frequency: 50–60 Hz
Voltage: 100–120 and 200–240V, mains voltage fluctuations not to exceed ±10% of the nominal voltage |
Probe Rinse |
Through a dedicated rinse station for rinsing the inside and outside of the probe; selectable rinse volume and flow rate |
Sampler Type |
X/Y/Z with stationary rack design |
Software |
Via Gilson UniPoint™ System Software |
Syringe Capacity |
100 or 500 µL (standard) |
Syringe Pump |
Integral, high-precision |
Dimensions (w x d x h) |
38 x 38 x 38.5 cm (15 x 15 x 15.1 in.) |
Weight |
18 kg (40.1 lbs.) |
|
