Manufacturing Standards

Meets applicable safety and EMC certification standards; UL and CE certified

Arm Speed (max.)

X: 10.16 cm/sec (4.0 in./sec)
Y: 8.76 cm/sec (3.5 in./sec)

Available Sample Loops

1 (internal), 5, 10, 20 (standard), 50, 100, 200 or 500 µL; 1, 2 or 5 mL

Available Valve

235/235P: Rheodyne RV700-120 analytical injection valve
SP 235/SP 235P: Rheodyne RV700-100 analytical injection valve

Communication Interface

Four inputs (contact closure), four relay outputs and one switched +12V DC, 0.5A output

Dead Volume

235/235P: 1.5 µL from PEEK injection port to sample loop
SP 235/SP 235P: 7 µL from PEEK injection port to sample loop

Injection Volume

500 nL–5 mL

Front Panel

STOP/HOME soft key and LED indicator lights for POWER, READY, INJECT, LOAD, and ERROR

Injection Carryover †

<0.0035%

Injection Reproducibility †

<0.5% CV with 20-µL loop and 100-µL syringe

Liquid Contact Materials

304 and 316L stainless steel, ceramic, PEEK

Locator Plate Capacity

Up to 4 96- or 384-well microplates, 192 2-mL vials or 384 0.7-mL vials*
*Racks for the 235P and SP 235P only accept microplates.

Power Requirements

Frequency: 47–63 Hz
Voltage: 85–245V

Probe Rinse

Through a dedicated rinse station for rinsing the inside and outside of the probe; selectable rinse volume and flow rate. Rinse station may also be used for a flow through rinse

Sampler Type

X/Y/Z with stationary rack design

Software

Via Gilson 235 Autoinjector Software, UniPoint™ System Software or 735 Sampler Software

Syringe Capacity

100, 250 or 500 µL; 1, 5 or 10 mL

Syringe Pump

Integral, high-precision, single-piston

Temperature Range *

8°–40°C
*Actual temperature is a function of the ambient temperature and the style of microplates used.

Valve Switching Speed

<200 ms

Vertical Punch Strength

1.8 kg (4.0 lbs.)

Dimensions (w x d x h)

25.9 x 61.2 x 35.1 cm (10.2 x 24.1 x 13.8 in.)

Weight

235/SP 235: 17.7 kg (39 lbs.)
235P/SP 235P: 20 kg (44 lbs.)