Gilson’s 321/322 HPLC pumps and multisolvent pumps are designed for use in Gilson’s HPLC Systems for analytical and semipreparative chromatography. The pump heads are easy to access and simple to maintain, and the pumps are stackable to conserve bench space.
Cat. No. GF-38103211 (321), GF-381032211/GF-381032221 (322)
Features:
- 321 functions as a controller with integrated keypad; 322 is remotely controlled via the 321 controller or UniPoint™ System Software
- H1 pump heads are ideal for 2–12 mm ID columns with flows up to 15 mL/min and pressures up to 8,700 psi
- H2 pump heads are ideal for 3–20 mm ID columns with flows up to 30 mL/min and pressures up to 4,300 psi
- High-pressure Adjustable Volume Dynamic Mixer (AVDM™) enables fast gradient response times and homogeneous mixtures for analytical to semipreparative applications
- Keypad control: safety files (pressure limits, emergency signal and power failure); anomaly processing procedures with related outcomes; GLP functions: solvent consumption, diagnostic helps, maintenance logs, piston seal installation, mixing test and audit trail
- UniPoint™ System Software provides control within a complete prep workstation; includes data processing and results reporting
Specifications:
Manufacturing Standards |
Meet applicable Safety and EMC certification standards; UL and CE certified |
Composition and Mixing |
Increment: 0.1%
Dwell Volume: 260–2260 µL, pressure-independent (60 µL excluding mixer volume)
Effective Mixing Volume: 220 µL for 1 mL/min and 0.2 mL mixer volume adjustment
Gradient Linearity Range : 1–98%B for 1 mL/min and higher, mixer volume adjustment set at 0.2 mL |
Environmental Conditions |
Indoor use
Altitude: up to 2000 m
Temperature range: 5–40°C
Air pressure: 75–105 kPa
Pollution degree: 1 or 2, in accordance with IEC 66
Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C |
Flow Rate |
0.15–15 mL/min (8,700 psi)
Selectable units: µL/min and mL/min (default: mL/min)
Adjustment increment: 1 µL/min
Accuracy: ≤±2% or 4 µL/min for H1 and 8 µL/min for H2
Repeatability: <0.7% or 2 µL/min for H1 and 4 µL/min for H2
Minimum adjustable volume: 2 µL/min for H1, 5 µL/min for H2 |
Front Panel (321 Pump) |
40-character, eight-line display, adjustable contrast turning off after 0–999 min. (default: 10 min); 25 functional keys including six soft keys |
Liquid-Contact Materials |
316L stainless steel, titanium, FEP, PTFE, PCTFE, ETFE, PEEK, UHMWPE, sapphire, ruby, and ceramics |
Power Requirements |
Frequency: 50–60 Hz
Voltage: 90–120 or 220–260V; mains voltage fluctuations not to exceed ±10% of the nominal voltage |
Pressure |
Nominal range from 0.5 MPa (5 bar, 70 psi) up to 60 MPa (600 bar, 8,700 psi) for H1, up to 30 MPa for H2 |
Pump Options |
321-H1*: master pump (w/control panel), 15 mL/min, 60 MPa (8,700 psi)
322-H1: remote control pump (w/o control panel), 15 mL/min, 60 MPa (8,700 psi)
321-H2*: master pump (w/control panel), 30 mL/min, 30 MPa (4,350 psi)
322-H2: remote control pump (w/o control panel), 30 mL/min, 30 MPa (4,350 psi)
*H1 and H2 are interchangeable pump heads. |
Software |
Via UniPoint™ System Software and 506C interface or GSIOC slave bus |
Dimensions (w x d x h) |
321: 26 x 41 x 51 cm (10.2 x 16.2 x 20.1 in.)
322: 26 x 41 x 38.7 cm (10.2 x 16.2 x 15.3 in.) |
Weight |
30 kg (66.1 lbs.) |
|
