Manufacturing Standards

Meets applicable safety and EMC certification standards; UL and CE certified

Arm Speed

X/Y: 25 cm/sec (9.9 in./sec)
Z: 2.0, 3.0, 6.2, 12.7, 24.7 cm/sec (0.79, 1.18, 2.44, 5.00, 9.72 in./sec)

Communication Interface

RS-232 or GSIOC; Four inputs (contact closure, TTL, or open-collector), four relay outputs and one switched +24V DC (500 mA max.) output

Liquid Handling

Reproducibility:
0.8% CV at 10 µL
Accuracy:
98.2% at 10 µL

Front Panel

One yellow LED indicator light

Horizontal Motion Strength

X: 2 kg (5 lbs.)
Y: 1.5 kg (3 lbs.)

Maximum Number of Vials

432 (7 x 40 mm or 10 x 75 mm)

Number of Racks

Up to four Code 20- or 30-Series racks

Power Requirements

Frequency: 50–60 Hz
Voltage: 90–120 or 220–240V, mains voltage fluctuations not to exceed ±10% of the nominal voltage
Current rating: one 2.0A fuse for 90–120V or two 2.0A fuses for 220–240V

Probe Positioning Performance

Accuracy: ±1 mm in X/Y/Z dimensions
Repeatability: ±0.25 mm in X/Y/Z dimensions

Probe Rinse

Through a dedicated rinse station for rinsing the inside and outside of the probe

Sampler Type

X/Y/Z with stationary rack design

Software

Via Gilson TRILUTION™ Software

Vertical Punch Strength

1 kg (2 lbs.)

Dimensions (w x d x h*)

53.5 x 43.7 x 60* cm (21.1 x 17.2 x 24* in.)
*Maximum height. Z-arm height is adjustable to accommodate vessel heights between 1 and 150 mm (dependent on installed Z-arm).

Weight

18.6 kg (41 lbs.)